Amplify - Wet Coat

€ 14,38

Recommended accessories

Youtube Videos

Similar products

Repel - Clear View
Extract - Degreaser
Apex+ - Gloss Booster
vax wax vaxa lackskydd carnubavax carnuba keramiskt vax bilvård skydda lacken snabbvax
Magnify - Wax
€ 43,44

AMPLIFY, is the world's first (?!) ceramic wet coat that is 100% biodegradable! Contains no PFAS, VOC and it is completely label-free (no hazard symbols)!

Super easy to use and gives great drainage, shine and protection without any frizz. Works equally well on wrap, PPF, matte paint plastics, glass and rims. You don't feel anything in your eyes, lungs, etc. as you easily do with stronger chemicals! Works great diluted all the way up to 1:10 (affordable!).

In other words, a product that cares for the environment and you without compromising performance. Smells amazing of some exotic fruits, think Fanta Exotic (ish). Works on virtually any material such as paint, glass, plastic, gelcoat, alu, rubber etc. Bear in mind that the product is very drying so you'll go a long way with a little, as I always advocate. Experiment to see what you like and feel free to test on one panel at a time before getting to know the product. As always with our products, less is more! 

Super-easy to use:

1. Wash the vehicle with all steps, avoid shampoos with drainage such as Purify S+ etc (can be a bit much of a good thing)! Works of course, but then dilute Amplify with water just in case.

2. Spray on wet surface

3. Rinse thoroughly

4. Wipe with microfiber cloth of choice

5. Yes we know, it's crazy!


Ps. can of course also be used on dry cars as a quick
detailer and you can also dilute it up to 1:10, but feel free to lab what you like best yourself. It all depends a bit on how good the base is, if you have all our protectors underneath such as Magnify - Coating, Refract etc then it works fine to dilute. But, it is meant to be used as is so again, feel free to try out what you like best yourself. Please avoid direct sunlight when using, of course this applies to all car care products.

Tip: Make sure the surface is cool and thoroughly cleaned (rinse thoroughly). Always start with one or two panels and then rinse off so you know how it works in your particular environment. Keep in mind that it is super-potent, less is more and avoid sun/wind.

If, against all odds, any kind of flame appears, just buff it off when you wipe the car with the microfiber cloth or if it has already hardened, it's easiest to run with a damp cloth and Apex+! If that doesn't work, sponge in Dissolve or preferably Prime - Panel Wipe and it will go away. 

Keep in mind that if you stand outside, the wind and heat will accelerate the flash time, so if you're a bit unfamiliar with the product, run one or two panels at a time and then shower off.  

Avoid Purify S+ or other shampoos with "Coating" before use, usually works but can be a little too much of a good thing! The first few times you try it, you might want to start with one panel at a time or dilute it a bit until you are happy. 




 
Unlabelled
Contains: dimethicone. Preservative: Sodium - Hydroxymethylglycinate.
Fragrance: Perfume, Citral, Limonene, Linalool.